Living up to expectations, the new products keep evolving! The entire lineup of PowerPi products has been brought together, covering four major categories: digital display testing, energy storage solutions, core fast charging, and accessories/tools. From basic testing to high-power energy storage, from everyday fast charging to professional R&D, it fully meets various scenario needs.
This article summarizes all PowerPi products for sale and new releases. Each product includes links to detailed reviews and in-depth articles, with new products continuously added. Unlock the core strength of all PowerPi categories in one place—bookmark it and check anytime without getting lost~
The table above summarizes all PowerPi products, covering classification, name, key highlights, parameters, and other essential information. It clearly presents the features and applicable scenarios of each product for quick reference.
Digital Display Testing: Precise and Visual, Testing Made Efficient
Focused on precise monitoring needs, these products are compact, portable, and high-performing, suitable for R&D testing, DIY tuning, daily use, and other scenarios, allowing real-time tracking of core charging/discharging parameters.
PowerPi XT60 High-Current Bidirectional Digital Meter
A power tester supporting real-time temperature and humidity detection, featuring a 1.47-inch IPS curved color screen, 5-36V wide voltage support, handling 80A peak current and 30A continuous current. With a transparent shell and gold-plated PCB design, it has excellent heat dissipation, offering both quality and practicality. It's a great helper for high-power charge/discharge testing and suits various DIY projects, fast-charging R&D, and high-power device debugging.
Open Source Projects: Tech Sharing, Co-Creating the Ecosystem
PowerPi adheres to the open-source sharing philosophy, launching heavyweight open-source projects that empower hardware enthusiasts, developers, and manufacturers, lowering R&D barriers and promoting co-construction of the fast-charging and power technology ecosystem.
PowerPi ITXPower Open Source Project (Idle PC Power Supply to PD3.1 Fast Charging)
The PowerPi ITXPower open-source project uses a standard ITX board design, supports 5-42V wide voltage input, 24PIN, 10PIN, DC5525, XT30, XT60, Lenovo rectangular interface, and outputs stable 48V via XT60. With different chips, higher rated output power can be achieved—using the YX2265 chip as an example, the rated output is 600W with 96.7% efficiency.
With this open-source project, users can turn idle PC power supplies into PD3.1 fast charging stations for DIY high-power charging stations, portable energy storage, lab power, or old power supply retrofits. It suits hardware enthusiasts, developers, manufacturers for secondary development, and scenarios emphasizing green resource reuse.
PowerPi X700C6 Fast Charging Module
A high-power fast-charging module with an integrated AI assistant, serving both as a development prototype for the XiaoDianPin Pro/Ultra and a product aimed at developers and beginners
Product open-source schematics, software source code, and multiple communication protocols, supporting development in charging, IoT, and other scenarios.
It features an end-to-cloud integrated design, equipped with FPGA and ESP32 chips, enabling dynamic power scheduling, OTA upgrades, and visual management via a mini program. The module supports open protocols and MQTT access, compatible with smart homes and private clouds, promoting open innovation for the smart charging ecosystem. Suitable for research and development implementation of various fast-charging devices, energy storage, mobile power, IoT products, and more.
Core Fast-Charging Module Types: High Power, Multi-Protocol, Multi-Scenario Compatible
Covers 140W high-power, gallium nitride, in-vehicle DC, and other types of fast-charging modules, compatible with mainstream protocols such as PD3.1, with high integration and compact size, suitable for DIY, R&D debugging, mobile power, energy storage, automotive, industrial, and other scenarios.
PowerPi D250ACC PD3.1 140W Digital Display Fast-Charging Module
A protocol conversion fast-charging module supporting PD3.1 140W, with a screen displaying real-time charging parameters for multiple interfaces, and compatible with mini program online viewing. The fast-charging module features excellent design, high integration, and complete protection, mainly for high-power protocol conversion and multi-parameter monitoring, suitable for developer secondary development and high-power device protocol conversion scenarios.
PowerPi D170ACC Gallium Nitride DC Fast-Charging Module
A high-power fast-charging module using gallium nitride core technology, with high conversion efficiency and low heat. The DC fast-charging design is suitable for high-power DC charging scenarios, with multiple safety protection mechanisms, balancing performance and safety, compatible with high-power devices in all kinds of cigarette lighters and car electronics.
PowerPi D140C Fast-Charging Module
A fast-charging module supporting single-C PD3.1 140W output, using DC input and C output, compatible with PPS, QC, FCP, and other fast-charging protocols. Dimensions: 71.66×39.59×10.38mm, weight 20.9g. Mainly used for DC conversion and high-power charging testing, suitable for R&D testing and device fast-charging conversion scenarios.
PowerPi D140AC Fast-Charging Module
The PowerPi D140AC is a fast-charging module using an aluminum substrate cooling solution, dimensions about 80.18mm×50.12mm×11.31mm, weight approximately 27g. It supports 5–32V wide input, up to 20V 7A 140W high-power output, features the Zhirong SW3538 chip, and has 1A1C dual ports for simultaneous power supply. Built-in reverse connection protection, automatically cuts off power if the positive and negative poles are connected incorrectly, ensuring safety.
PowerPi X140C-B Bidirectional 140W 6-Cell PD3.1 Mobile Power Fast-Charging Module
This is a fast-charging module that supports bidirectional 140W high power output, compatible with the PD3.1 protocol, and can adapt to up to 6 series battery packs. It integrates the Injoinic IP2366 main control chip and comes with fan temperature control and overcurrent protection. It has three power levels adjustable, is compact in size, and is suitable for energy storage devices, DIY power banks, and R&D scenarios.
PowerPi X140C-C 140W Fast-Charging Module
This is a high-power fast-charging module that supports 140W, featuring XT30 and XT60 dual input interfaces and a USB-C output. Equipped with the Injoinic IP6557 buck-boost controller, it supports 5-30V wide input, compatible with PD3.1 and various mainstream fast-charging protocols, suitable for powering and charging phones, tablets, drones, laptops, power banks, RC models, DIY products, and more. Its compact size makes it easy to integrate into various high-power charging devices.
PowerPi D60ACC Retractable Cable Fast-Charging Module
This is a car-mounted all-in-one retractable cable fast-charging module, combining the car charger with a storable cable. It comes with a 72cm retractable USB-C cable and 1A1C output port, compatible with 12V/24V vehicles. Using Injoinic IP6520 & IP6565 dual-chip solution, it supports PD3.0/PPS and all mainstream fast-charging protocols. The side display can show real-time power and fast-charging status; single port maximum 30W, total output 60W. Dimensions: 99.64×51.3×28.95mm, weight: approx. 73.3g. Suitable for daily car fast charging and multi-device parallel power scenarios.
PowerPi C60AACC Clip-On Fast-Charging Module
This is a 60W clip-on multi-port fast-charging module, made with 94-V0 fireproof casing. It comes with a 154cm integrated Type-C cable with bend-resistant protection, featuring 2A2C four-port output, dual C ports each supporting 30W, total power 60W, supporting blind insertion. Input supports DC 12-24V wide voltage, included cable has E-Marker chip, supports 20V5A power supply and USB 2.0 data transfer. The back has a clamp to attach it to cars, bedside, or desks. Weighing only 87g, it’s suitable for car rear seats, travel, and indoor multi-device charging scenarios.
PowerPi D45AC Digital Display Fast Charging Module
This is a compact, business card-sized digital display fast charging module with DC input and USB-A and USB-C dual output ports. It supports a wide voltage range of 15-24V input. Dual chips work together to drive the output, with the C port providing up to 25W and the A port up to 20W. The LCD display shows real-time input/output voltage, current, power, and onboard temperature. Multiple devices can fast charge simultaneously without interference, making it suitable for DIY debugging, daily charging, and small device power supply scenarios.
PowerPi D36AC DC Fast Charging Module
A thumb-sized, compact car DC fast charging module. The C port supports up to 36W output and is compatible with PD3.0, PPS, QC, and other fast charging protocols. The A port supports additional devices for charging. It works with 12V/24V vehicles and is compatible with cars, SUVs, buses, and trucks.
Energy Storage/New Energy Solutions: Efficient and Stable, a Good Partner for R&D
Specifically designed for energy storage and new energy R&D and demo scenarios, powered by core technology, providing stable performance and helping developers quickly implement related products while reducing R&D costs.
PowerPi Nanxin SC8808 Bi-directional Synchronous Buck-Boost Chip 80V High Voltage Energy Storage Demo
An energy storage R&D demo board based on the Nanxin SC8808 chip, supporting up to 80V battery voltage and 88V withstand voltage. It allows bi-directional charging and discharging with I2C control and has a built-in MPPT function. The 4-layer board layout is neat, making it suitable for energy storage and new energy product R&D and demonstration verification scenarios. It’s easy to operate and highly reliable.
Accessory Tools: Convenient and Practical, Unlock More Possibilities
Used alongside core products, including fast charging cables, trick devices, etc., these tools are easy to operate, highly compatible, and suitable for testing and daily fast charging scenarios, enhancing the overall user experience.
PowerPi C100CC Fast Charging Cable Solution
A reference design for a PD3.2 fast charging cable that supports one-to-two digital display, with dual C outputs. C1 is additionally compatible with UFCS. In tests, it can charge the iPhone 17 Pro Max at up to 36W. Powered by the Shichangding main control chip, it achieves a conversion efficiency of up to 98.8%, and the cable is flexible and durable. Its main uses are multi-device fast charging and parameter monitoring, suitable for daily charging and R&D debugging scenarios.
PowerPi SK100 Spoofer
A 100W fast charging spoofer supporting PD and QC protocols. It allows conduction at up to 20V5A and features a compact design, weighing only 4.2g. The red DIP switch allows quick voltage switching, prioritizes PD protocol handshake, and has a clear LED status indicator. It also has reserved flying wire pads, suitable for R&D testing, production line inspection, and other scenarios.
PowerPi SK240 Spoofer
A PD spoofer available in both XT60 and USB-A versions, supporting up to 48V 5A 240W conduction testing. The overall design is very compact and portable, suitable for all kinds of fast charging tests, device adaptation, R&D debugging, and high-power output applications.
PowerPi will continue to update new product developments, constantly refine the product summary, and add related links for new products. Whether you are a fast charging R&D professional, a DIY enthusiast, or need to adapt to various fast charging, energy storage, R&D debugging, quality inspection, or verification scenarios, you can find the right choice in the PowerPi series.
Follow us to get the latest news, product details, and reviews first-hand, and unlock more practical uses for core PowerPi products~